Hirschmann RS20 Reference Manual

276
4.10 User Account Management Commands
CLI L2P
Release 7.0 05/2011
4.10.10users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login
user. The valid authentication protocols are none, md5 or sha. If md5 or sha are
specified, the user login password is also used as the snmpv3 authentication
password and therefore must be at least eight characters in length. The
<username> is the login user name associated with the authentication pro-
tocol.
Default
no authentication
Format
users snmpv3 authentication <username> <none | md5
| sha>
Mode
Global Config
U no users snmpv3 authentication
This command sets the authentication protocol to be used for the speci-
fied login user to none. The <username> is the login user name for
which the specified authentication protocol will be used.
Format
users snmpv3 authentication <username>
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16