Hirschmann RS20 Reference Manual

202
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.39 set igmp aging-time-unknown
This command configures the IGMP Snooping aging time for unknown
multicast frames (unit: seconds, min.: 3, max.: 3,600, default: 260).
Format
set igmp aging-time-unknown <3-3600>
Mode
Global Config
4.9.40 set igmp automatic-mode
If enabled, this port is allowed to be set as static query port automatically, if
the LLDP protocol has found a switch or router connected to this port. Use
the command's normal form to enable the feature, the 'no' form to disable it.
Default
disabled (RS20: enabled)
Format
set igmp automatic-mode
Mode
Interface Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16