Hirschmann RS20 Reference Manual

CLI Commands: Base
140
4.6 Management Commands
CLI L2P
Release 7.0 05/2011
4.6.53 snmp-server community ipaddr
This command sets a client IP address for an SNMP community. The ad-
dress is the associated community SNMP packet sending address and is
used along with the client IP mask value to denote a range of IP addresses
from which SNMP clients may use that community to access the device. A
value of 0.0.0.0 allows access from any IP address. Otherwise, this value is
ANDed with the mask to determine the range of allowed client IP addresses.
The name is the applicable community name.
Default
0.0.0.0
Format
snmp-server community ipaddr <ipaddr> <name>
Mode
Global Config
U no snmp-server community ipaddr
This command sets a client IP address for an SNMP community to
0.0.0.0. The name is the applicable community name.
Format
no snmp-server community ipaddr <name>
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16