Hirschmann RS20 Reference Manual

CLI Commands: Switching
432
5.2 MRP
CLI L2P
Release 7.0 05/2011
5.2.2 show mrp current-domain
This command displays the settings and states of the MRP-Ring´s current
domain. The following details are displayed on execution of the command. If
you omit the optional keywords (e. g., advanced-mode), all settings will be
displayed.
Format
show mrp current-domain [advanced-mode |
domain-id | info | manager-priority | mode |
name | recovery-delay | operation |
port [primary | secondary] | summary | vlan]
Mode
Privileged EXEC and User EXEC
advanced mode
Show the switch's advanced mode setting for the given MRP domain.
domain-id
Show the given MRP domain's ID.
info
Show status information for the given MRP domain.
Note: the information displayed depends on the switch's mode (Client
or Manager) because only a subset of them are useful for each mode.
manager-priority
Show the switch's manager priority for the given MRP domain.
mode
Show the switch's mode for the given MRP domain.
name
Show the given MRP domain's name.
recovery-delay
Show the given MRP domain's recovery delay.
operation
Show the switch's administrative setting for the given MRP domain
(enabled or disabled).
port
Show the ports for the given MRP domain

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16