Hirschmann RS20

CLI Commands: Switching
438
5.2 MRP
CLI L2P
Release 7.0 05/2011
5.2.7 show arc
This command displays the current ARC configuration and the result of the
last action.
Format
show arc
Mode
Global Config
Client Settings:
Display the Client Settings for the current ARC configuration.
Admin Status
Display if the ARC client is enabled or disabled.
MAC address of the ARC Manager
Display the MAC address of the ARC Client.
IP address of the ARC Manager
Display the IP address of the ARC Client.
Port 1
Display the number of Ring Port 1 for the client (slot/port).
Port 2
Display the number of Ring Port 2 for the client (slot/port).