Hirschmann RS20 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.7 Syslog Commands
163
4.7.6 logging host reconfigure
The Logging Host Index for which to change the IP Address.
Format
logging host reconfigure <hostindex> <hostaddress>
Mode
Global Config
4.7.7 logging host remove
The Logging Host Index to be removed.
Format
logging host remove <hostindex>
Mode
Global Config
4.7.8 logging snmp-requests get operation
This command enables or disables the logging of SNMP GET requests.
Default
Disabled
Format
logging snmp-requests get operation
{ enable | disable }
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16