Hirschmann RS20 Reference Manual

CLI Commands: Base
86
4.4 Class of Service (CoS) Commands
CLI L2P
Release 7.0 05/2011
4.4.4 show classofservice dot1p-mapping
This command displays the current 802.1p priority mapping to internal traffic
classes for a specific interface. The slot/port parameter is required on
platforms that support priority to traffic class mapping on a ‘per-port’ basis.
Platforms that support priority to traffic class mapping on a per-port basis:
Format
show classofservice dot1p-mapping
Platforms that do not support priority to traffic class mapping on a per-port
basis:
Format
show classofservice dot1p-mapping
Mode
Privileged EXEC and User EXEC

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16