Hirschmann RS20 Reference Manual

CLI Commands: Switching
444
5.3 HIPER-Ring
CLI L2P
Release 7.0 05/2011
5.3.3 hiper-ring mode
This command sets the HIPER-Ring mode. Possible values are:
D ring-manager Set the switch's HIPER Ring mode to Ring Manager.
D rm Abbreviation of Ring Manager.
D ring-switch Set the switch's HIPER Ring mode to Ring Switch.
D rs Abbreviation of Ring Switch.
Default
none
Format
hiper-ring mode <{ring-manager|ring-switch|rm|rs}>
Mode
Global Config
5.3.4 hiper-ring port primary
Enter the switch's primary HIPER Ring port.
Default
n/a (not set)
Format
hiper-ring port primary <primary ring port>
Mode
Global Config
primary ring port
Enter the switch's primary HIPER Ring port (<slot/port>).

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16