Hirschmann RS20 Reference Manual

CLI Commands: Security
530
6.1 Security Commands
CLI L2P
Release 7.0 05/2011
6.1.36 show radius
This command is used to display the various RADIUS configuration items for
the switch as well as the configured RADIUS servers. If the optional token
'servers' is not included, the following RADIUS configuration items will be dis-
played.
Format
show radius [servers]
Mode
Privileged EXEC and User EXEC
Primary Server IP Address
Indicates the configured server currently in use for authentication
Number of configured servers
The configured IP address of the authentication server
Max number of retransmits
The configured value of the maximum number of times a request
packet is retransmitted
Timeout Duration
The configured timeout value, in seconds, for request re-transmis-
sions
Accounting Mode
Yes or No
If the optional token 'servers' is included, the following information regarding
the configured RADIUS servers is displayed.
IP Address
IP Address of the configured RADIUS server
Port
The port in use by this server
Type
Primary or secondary
Secret Configured
Yes / No

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16