Hirschmann RS20

242
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.82 speed
This command sets the speed and duplex setting for the interface.
Format
speed {<100 | 10> <half-duplex | full-duplex> | 1000
full-duplex}
Mode
Interface Config
Acceptable values are:
1000f
1000BASE-T full duplex
100h
100BASE-T half duplex
100f
100BASE-T full duplex
10h
10BASE-T half duplex
10f
100BASE-T full duplex