CLI L2P
Release
7.0
05/2011
4.12
LLDP - Link Layer Discovery Protocol
319
4.12.22lldp config chassis tx-delay
Configure the LLDP transmit delay, the delay between successive LLDP
frame transmissions (unit: seconds, min.: 1 sec., max.: 8192 sec.,
default: 2 sec.).
Format
lldp config chassis tx-delay <tx delay>
Mode
Global Config
Tx-delay
Configure the LLDP transmit delay, the delay between successive
LLDP frame transmissions (unit: seconds, min.: 1 sec., max.: 8192
sec., default: 2 sec.).
4.12.23lldp config chassis tx-hold-mult
Configure the LLDP transmit hold multiplier, a time-to-live value expressed
as a multiple of the LLDP Message Tx Interval (tx-interval), min.: 2, max.: 10,
default: 4.
Format
lldp config chassis tx-hold-mult
<tx hold multiplier>
Mode
Global Config
Tx-hold-mult
Configure the LLDP transmit hold multiplier, a time-to-live value
expressed as a multiple of the LLDP Message Tx Interval (tx-interval),
min.: 2, max.: 10, default: 4.
To Next Page
Loading...
