CLI Commands: Security
512
6.1
Security Commands
CLI L2P
Release
7.0
05/2011
6.1.22 dot1x user
This command adds the specified user to the list of users with access to the
specified port or all ports. The <user> parameter must be a configured user.
Format
dot1x user <user> {<slot/port> | all}
Mode
Global Config
U no dot1x user
This command removes the user from the list of users with access to the
specified port or all ports.
Format
no dot1x user <user> {<slot/port> | all}
Mode
Global Config
To Next Page
Loading...
