Hirschmann RS20 Reference Manual

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.7 DHCP Relay Commands
467
5.7 DHCP Relay Commands
These commands configure the DHCP Relay parameters. The commands
are divided by functionality into these different groups:
D Configuration Commands are used to configure features and options of
the switch. For every configuration command there is a show command
that will display the configuration setting.
D Show commands are used to display switch settings, statistics and other
information.
D Commands that start with the keyword ’no’ (so-called ’no commands’) are
used to clear some or all of the settings to factory defaults.
5.7.1 show dhcp-relay
Display the settings of the BOOTP/DHCP relay.
Format
show dhcp-relay [opt82 | port {<slot/port>|all} |
server-address]
Mode
Privileged EXEC and User EXEC

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16