Hirschmann RS20 Reference Manual

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
6.1 Security Commands
519
6.1.30 show radius accounting
This command is used to display the configured RADIUS accounting mode,
accounting server and the statistics for the configured accounting server.
Format
show radius accounting [statistics <ipaddr>]
Mode
Privileged EXEC and User EXEC
If the optional token 'statistics <ipaddr>' is not included, then only the
accounting mode and the RADIUS accounting server details are displayed.
Mode
Enabled or disabled
IP Address
The configured IP address of the RADIUS accounting server
Port
The port in use by the RADIUS accounting server
Secret Configured
Yes or No
If the optional token 'statistics <ipaddr>' is included, the statistics for the
configured RADIUS accounting server are displayed. The IP address
parameter must match that of a previously configured RADIUS accounting
server. The following information regarding the statistics of the RADIUS
accounting server is displayed.
Accounting Server IP Address
IP Address of the configured RADIUS accounting server
Round Trip Time
The time interval, in hundredths of a second, between the most
recent Accounting-Response and the Accounting-Request that
matched it from the RADIUS accounting server.
Requests
The number of RADIUS Accounting-Request packets sent to this
accounting server. This number does not include retransmissions.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16