Appendix- VLAN Example
CLI L2P
Release
7.0
05/2011
7.1
SOLUTION 1
541
7.1 SOLUTION 1
All traffic entering the ports is tagged traffic. Since the traffic is tagged, the
PVID configuration for each port is not a concern.
D The network card configuration for devices on Project A must be set to tag
all traffic with 'VLAN 2'
D The network card configuration for devices on Project B must be set to tag
all traffic with 'VLAN 3'
D The network card configuration for devices on Project C must be set to tag
all traffic with 'VLAN 4'
D The network card configuration for devices on Project P must be set to tag
all traffic with 'VLAN 9'
To Next Page
Loading...
