CLI Commands: Base
CLI L2P
Release
7.0
05/2011
4.6
Management Commands
103
4.6.12 bridge vlan-learning
With ”independent” you set the Shared VLAN Learning mode to Indepen-
dent. The switch will treat equal MAC source addresses from different VLANs
as separate addresses.
With ”shared” you set the Shared VLAN Learning mode to Shared. The
switch will treat equal MAC source addresses from different VLANs as the
same adress.
Format
bridge vlan-learning {independent|shared}
Mode
Global Config
4.6.13 digital-input
This command configures the MICE IO-Module digital inputs.
Format
digital-input
admin-state {enable | disable}
refresh-interval <refresh-interval>
log-event {all | <slot/input>} {enable|disable}
snmp-trap {all | <slot/input>} {enable|disable}
Mode
Global Config
admin-state
This command enables or disables the polling task for digital inputs of
the MICE IO-Module. When disabled, no event logging or SNMP
traps will work. Default: disable.
disable Disable the IO-Module digital inputs admin state.
enable Enable the IO-Module digital inputs admin state.
To Next Page
Loading...
Need help?
General
