Hirschmann RS20

236
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.76 show voice vlan interface
Use this command to display Use this command to display a summary of the
current Voice VLAN configuration for a specific interface.
<slot/port> indicates a specific physical interface.
all indicates all valid interfaces.
Format
show voice vlan interface {<slot/port> | all}
Mode
Privileged EXEC
<slot/port>
Indicates a specific physical interface.
all
Indicates all valid interfaces.
Interface
Displays the physical interface.
Voice VLAN Interface Mode
Displays the Voice VLAN Interface Mode.
Value range: Disabled, Enabled.
Voice VLAN Authentication
Displays the Voice VLAN Authentication.
Value range: Disabled, Enabled.
Voice VLAN Port Status
Displays the Voice VLAN Port Status.
Value range: Disabled, Enabled.