Hirschmann RS20 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
49
4 CLI Commands: Base
This chapter provides detailed explanation of the Switching commands. The
commands are divided into five functional groups:
D Show commands display switch settings, statistics, and other information.
D Configuration commands configure features and options of the switch.
For every configuration command, there is a show command that displays
the configuration setting.
D Copy commands transfer or save configuration and informational files to
and from the switch.
D Clear commands clear
- some
(e.g. the ”clear arp-table-switch” command which clears the agent´s
ARP table) or
- all
(e.g. the ”clear config” command which resets the whole
configuration to the factory defaults
This chapter includes the following configuration types:
D System information and statistics commands
D Management commands
D Device configuration commands
D User account management commands
D Security commands
D System utilities
D Link Layer Discovery Protocol Commands
D Simple Network Time Protocol Commands
D Precision Time Protocol Commands
D Power over Ethernet Commands

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16