Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.9 Device Configuration Commands
211
4.9.51 set igmp querier status
Configure the IGMP Snooping Querier's administrative status
(enable or disable).
Default
disable
Format
set igmp querier status {enable | disable}
Mode
Global Config
4.9.52 set igmp querier tx-interval
Configure the IGMP Snooping Querier's transmit interval. The range is 2 to
3,599 seconds.
Default
125
Format
set igmp querier tx-interval <2-3599>
Mode
Global Config