270
4.10
User Account Management Commands
CLI L2P
Release
7.0
05/2011
4.10.4 users defaultlogin
This command assigns the authentication login list to use for non-configured
users when attempting to log in to the system. This setting is overridden by
the authentication login list assigned to a specific user if the user is config-
ured locally. If this value is not configured, users will be authenticated using
local authentication only.
Format
users defaultlogin <listname>
Mode
Global Config
listname
Enter an alphanumeric string of not more than 15 characters.
To Next Page
Loading...
