Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.17 Port monitor
385
4.17.2 show port-monitor <slot/port>
Use this command to display the Port Monitor details for the port.
Format
show port-monitor <slot/port>
Mode
Global Config
Port Monitor
Display if Port Monitor is enabled or disabled.
Link Flap
Display if Link Flap is enabled or disabled.
Crc-Fragment
Display if CRC Fragment is enabled or disabled.
Active Condition
Display the active condition for the port.
Possible values: Link-Flap, None.
Action
Display the action (disable port or send trap) to be triggered on the
port. Possible values: Disable-Port, Trap-Only.
Port Oper State
Display the link state of the port. Possible values: Up, Down.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16