Hirschmann RS20 Reference Manual

CLI Commands: Base
138
4.6 Management Commands
CLI L2P
Release 7.0 05/2011
4.6.51 snmp-server community
This command adds a new SNMP community name. A community name is
a name associated with the switch and with a set of SNMP managers that
manage it with a specified privileged level. The length of name can be up to
32 case-sensitive characters.
Note: Community names in the SNMP community table must be unique.
When making multiple entries using the same community name, the first
entry is kept and processed and all duplicate entries are ignored.
Default
Two default community names: Public and Private. You can replace
these default community names with unique identifiers for each com-
munity. The default values for the remaining four community names
are blank.
Format
snmp-server community <name>
Mode
Global Config
U no snmp-server community
This command removes this community name from the table. The name
is the community name to be deleted.
Format
no snmp-server community <name>
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16