376
4.15
PoE - Power over Ethernet
CLI L2P
Release
7.0
05/2011
4.15.3 inlinepower (Global Config)
Configure the global Inline Power parameters.
Format
inlinepower {admin-mode {disable|enable} |
trap {disable|enable} | threshold <1-99> }
Mode
Global Config
admin-mode
Configure the global Inline Power administrative setting (enable or
disable, default: enable).
trap
Configure the Inline Power notification (trap) setting (enable or dis-
able, default: disable).
threshold
Configure the Inline Power notification (trap) threshold (unit: percent
of maximum rated power, valid range: 1-99, default: 90).
To Next Page
Loading...
