Hirschmann RS20

CLI Commands: Switching
CLI L2P
Release 7.0 05/2011
5.6 Port Security
465
5.6.9 port-sec allowed-mac add
Enter the allowed MAC source address for this port,
format: nn:nn:nn:nn:nn:nn (n: hexadecimal digit) or
format: nn:nn:nn:nn:nn:nn/m
n: hexadecimal digit, m: decimal digit (1..48)
(up to 50).
Format
port-sec allowed-mac add <MAC Address 1>
<MAC Address 2> ... <MAC Address 50>
Mode
Interface Config
5.6.10 port-sec allowed-mac remove
Enter the allowed MAC source address for this port,
format: nn:nn:nn:nn:nn:nn (n: hexadecimal digit) or
format: nn:nn:nn:nn:nn:nn/m
n: hexadecimal digit, m: decimal digit (1..48)
(up to 50).
Format
port-sec allowed-mac remove <MAC Address 1>
<MAC Address 2> ... <MAC Address 50>
Mode
Interface Config