386
4.17
Port monitor
CLI L2P
Release
7.0
05/2011
4.17.3 show port-monitor brief
Use this command to display the Port Monitor brief summary.
Format
show port-monitor brief
Mode
Global Config
Intf
Display the number of the interface (slot/port).
Admin Mode
Display if Port Monitor is enabled or disabled.
Link Flap
Display if Link Flap is enabled or disabled.
Crc Fragment
Display if CRC Fragment is enabled or disabled.
Active Condition
Display the active condition for the port.
Possible values: Link-Flap, None.
Action
Display the action (disable port or send trap) to be triggered on the
port. Possible values: Disable-Port, Trap-Only.
Port Oper State
Display the link state of the port. Possible values: Up, Down.
To Next Page
Loading...
