Hirschmann RS20 Reference Manual

CLI Commands: Security
536
6.2 HTTP Commands
CLI L2P
Release 7.0 05/2011
6.2.2 ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level
can be set to TLS1, SSL3 or to both TLS1 and SSL3.
Default
SSL3 and TLS1
Format
ip http secure-protocol [SSL3] [TLS1]
Mode
Privileged EXEC

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16