Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.9 Device Configuration Commands
227
Link Trap
This object determines whether or not to send a trap when link status
changes. The factory default is enabled.
Flow
Indicates if enable flow control is enabled on this port.
Device Status
Indicates whether or not the given port's link status is monitored by
the device status.
VLAN Prio
This object displays the port VLAN priority.
4.9.67 show link-aggregation
This command displays an overview of all link-aggregations (LAGs) on the
switch.
Format
show link-aggregation {<logical slot/port> | all}
Mode
Privileged EXEC and User EXEC
Logical slot/port
Valid slot and port number separated by forward slashes.
Name
The name of this link-aggregation (LAG). You may enter any string of
up to 15 alphanumeric characters.
Link State
Indicates whether the Link is up or down.
Admin Mode
May be enabled or disabled. The factory default is enabled.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16