228
4.9
Device Configuration Commands
CLI L2P
Release
7.0
05/2011
Link Trap Mode
This object determines whether or not to send a trap when link status
changes. The factory default is enabled.
STP Mode
The Spanning Tree Protocol Administrative Mode associated with the
port or link-aggregation (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
Mbr Ports
A listing of the ports that are members of this link-aggregation (LAG),
in slot/port notation. There can be a maximum of eight ports assigned
to a given link-aggregation (LAG).
Port Speed
Speed of the link-aggregation port.
Type
This field displays the status designating whether a particular link-
aggregation (LAG) is statically or dynamically maintained. The possi-
ble values of this field are Static, indicating that the link-aggregation is
statically maintained; and Dynamic, indicating that the link-aggrega-
tion is dynamically maintained.
Active Ports
This field lists the ports that are actively participating in the link-aggre-
gation (LAG).
To Next Page
Loading...
Need help?
General
