CLI Commands: Switching
CLI L2P
Release
7.0
05/2011
5.1
Spanning Tree Commands
403
5.1.5 show spanning-tree mst port summary
This command displays the settings of one or all ports within the specified
multiple spanning tree instance. The parameter <mstid> indicates a particu-
lar MST instance. The parameter {<slot/port> | all} indicates the desired
switch port or all ports.
If 0 (defined as the default CIST ID) is passed as the <mstid>, then the status
summary is displayed for one or all ports within the common and internal
spanning tree.
Format
show spanning-tree mst port summary <mstid> {<slot/
port> | all}
Mode
Privileged EXEC and User EXEC
MST Instance ID
The MST instance associated with this port. Valid value: 0.
Interface
Valid slot and port number separated by forward slashes.
STP Mode
Current STP mode of this port in the specified spanning tree instance.
Type
Currently not used.
Port Forwarding State
The forwarding state of the port in the specified spanning tree
instance
Port Role
The role of the specified port within the spanning tree.
To Next Page
Loading...
Need help?
General
