Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.11 System Utilities
287
4.11.17clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format
clear vlan
Mode
Privileged EXEC
4.11.18config-watchdog
If the function is enabled and the connection to the switch is interrupted for
longer than the time specified in “timeout [s]”, the switch then loads the last
configuration saved.
Format
config-watchdog {admin-state {disable|enable}|
timeout <10..600>}
Mode
Global Config
admin-state
Enable or disable the Auto Configuration Undo feature
(default: disabled).
timeout
Configure the Auto Configuration Undo timeout (unit: seconds).