Hirschmann RS20 Reference Manual

258
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.102vlan port ingressfilter all
This command enables ingress filtering for all ports. If ingress filtering is dis-
abled, frames received with VLAN IDs that do not match the VLAN member-
ship of the receiving interface are admitted and forwarded to ports that are
members of that VLAN.
Default
disabled
Format
vlan port ingressfilter all
Mode
Global Config
U no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is
disabled, frames received with VLAN IDs that do not match the VLAN
membership of the receiving interface are admitted and forwarded to
ports that are members of that VLAN.
Format
no vlan port ingressfilter all
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16