Hirschmann RS20 Reference Manual

CLI Commands: Switching
398
5.1 Spanning Tree Commands
CLI L2P
Release 7.0 05/2011
Port Up Time Since Counters Last Cleared
Time since port was reset, displayed in days, hours, minutes, and
seconds.
STP BPDUs Transmitted
Spanning Tree Protocol Bridge Protocol Data Units sent
STP BPDUs Received
Spanning Tree Protocol Bridge Protocol Data Units received.
RST BPDUs Transmitted
Rapid Spanning Tree Protocol Bridge Protocol Data Units sent
RST BPDUs Received
Rapid Spanning Tree Protocol Bridge Protocol Data Units received.
MSTP BPDUs Transmitted
Multiple Spanning Tree Protocol Bridge Protocol Data Units sent
MSTP BPDUs Received
Multiple Spanning Tree Protocol Bridge Protocol Data Units received.
5.1.3 show spanning-tree mst detailed
This command displays settings and parameters for the specified multiple
spanning tree instance. The instance <mstid> is a number that corresponds
to the desired existing multiple spanning tree instance ID. The following de-
tails are displayed.
Format
show spanning-tree mst detailed <mstid>
Mode
Privileged EXEC and User EXEC
mstid
Enter a multiple spanning tree instance identifier.
Valid values: 0 - 4094.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16