Hirschmann RS20 Reference Manual

318
4.12 LLDP - Link Layer Discovery Protocol
CLI L2P
Release 7.0 05/2011
4.12.20lldp config chassis notification-interval
Configure the LLDP minimum notification interval (the minimum time after a
notification trap has been sent until a new trap can be sent, unit: seconds,
min.: 5 sec., max.: 3600 sec., default: 5 sec.).
Format
lldp config chassis notification-interval
<notification interval>
Mode
Global Config
Notification interval
Configure the LLDP minimum notification interval (the minimum time
after a notification trap has been sent until a new trap can be sent,
unit: seconds, min.: 5 sec., max.: 3600 sec., default: 5 sec.).
4.12.21lldp config chassis re-init-delay
Configure the LLDP re-initialization delay (unit: seconds, min.: 1 sec., max.:
10 sec., default: 2 sec.).
Format
lldp config chassis re-init-delay <re-init delay>
Mode
Global Config
Re-init-delay
Configure the LLDP re-initialization delay (unit:seconds, min.: 1 sec.,
max.: 10 sec., default: 2 sec.).

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16