Hirschmann RS20 Reference Manual

Appendix- VLAN Example
CLI L2P
Release 7.0 05/2011
7.2 SOLUTION 2
543
7.2 SOLUTION 2
The network card configuration for devices on Project A, B and C should be
set to NOT tag traffic.
To take care of these untagged frames configure the following:
D vlan pvid 2 (in interface 0/1)
D vlan pvid 2 (in interface 0/2)
D vlan pvid 3 (in interface 0/3)
D vlan pvid 3 (in interface 0/4)
D vlan pvid 4 (in interface 0/5)
D vlan pvid 4 (in interface 0/6)

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16