CLI Commands: Switching
CLI L2P
Release
7.0
05/2011
5.9
Sub-Ring Commands
489
5.9.8 sub-ring <id> mrp-domainID
Set an MRP domain ID for the given Sub-Ring ID.
Format
sub-ring <id> mrp-domainID {<id> |
default-domainID}
Mode
Global Config
<id>
sub-ring <id>: Specify the Sub-Ring ID whose settings you want to
configure.
<id>
Enter an MRP domainID for the given Sub-Ring ID.
The ID has to be 16 bytes long and contain only printable characters.
default-domainID
Enter the default MRP domainID for the given Sub-Ring ID.
The MRP domainID will be set to 255.255.255.255.255.255
255.255.255.255.255.255.255.255.255.255
To Next Page
Loading...
