Hirschmann RS20

CLI Commands: Switching
426
5.1 Spanning Tree Commands
CLI L2P
Release 7.0 05/2011
5.1.27 spanning-tree mst instance
This command creates a MST instance.
Format
spanning-tree mst instance <1-4094>
Mode
Global Config
<1-4094>
Enter a multiple spanning tree instance identifier.
U no spanning-tree mst instance
This command removes a MST instance.
Format
no spanning-tree mst instance <1-4094>
Mode
Global Config
<1-4094>
Enter a multiple spanning tree instance identifier.