Hirschmann RS20

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
6.2 HTTP Commands
535
6.2 HTTP Commands
6.2.1 ip http secure-port
This command is used to set the sslt port where port can be 1-65535 and the
default is port 443.
Default
443
Format
ip http secure-port <portid>
Mode
Privileged EXEC
U no ip http secure-port
This command is used to reset the sslt port to the default value.
Format
no ip http secure-port
Mode
Privileged EXEC