CLI Commands: Base
CLI L2P
Release
7.0
05/2011
4.1
System Information and Statistics Com-
51
4.1.3 show bridge address-learning
This command displays the address-learning setting.
The setting can be enable or disable.
Format
show bridge address-learning
Mode
Privileged EXEC and User EXEC
4.1.4 show bridge address-relearn-detect
This command displays the Bridge Address Relearn Detection setting and
the Bridge Address Relearn Threshold.
Format
show bridge address-relearn-detect
Mode
Privileged EXEC and User EXEC
Bridge Address Relearn Detection
Setting can be enable or disable.
Bridge Address Relearn Threshold
The threshold can be 1 to 1024.
To Next Page
Loading...
