CLI L2P
Release
7.0
05/2011
4.12
LLDP - Link Layer Discovery Protocol
325
4.12.34lldp med faststartrepeatcount
Use this command to set the value of the fast start repeat count.
Default
3
Format
lldp med faststartrepeatcount [count]
Mode
Global Config
[count]
The number of LLDP PDUs that will be transmitted when the product
is enabled. The range is 1 to 10.
U no lldp med faststartrepeatcount
Use this command to return to the factory default value.
Format
no lldp med faststartrepeatcount
Mode
Global Config
To Next Page
Loading...
