CLI Commands: Base
132
4.6
Management Commands
CLI L2P
Release
7.0
05/2011
4.6.44 show telnet
This command displays outbound telnet settings.
Format
show telnet
Mode
Privileged EXEC and User EXEC
Outbound Telnet Connection Login Timeout (minutes)
This object indicates the number of minutes a remote connection
session is allowed to remain inactive before being logged off. May be
specified as a number from 1 to 160. The factory default is 5.
Maximum Number of Outbound Telnet Sessions
This object indicates the number of simultaneous outbound connec-
tion sessions allowed. The factory default is 5.
Allow New Outbound Telnet Sessions
Indicates that new outbound telnet sessions will not be allowed when
set to no. The factory default value is yes.
To Next Page
Loading...
