Hirschmann RS20

264
4.9 Device Configuration Commands
CLI L2P
Release 7.0 05/2011
4.9.108voice vlan <id>
Use this command to configure VLAN tagging and 802.1p priority.
Format
voice vlan <id> [dot1p <priority>] }
Mode
Interface Config
<id>
Enter the Voice VLAN ID.
dot1p
Configure Voice VLAN 802.1p priority tagging for voice traffic.
<priority>
The priority tag range is 0–7.
U no voice vlan
This command disables the Voice VLAN feature on the interface.
Default
Disabled
Format
no voice vlan
Mode
Interface Config