Hirschmann RS20 Reference Manual

CLI Commands: Switching
456
5.5 Redundant Coupling
CLI L2P
Release 7.0 05/2011
5.5.2 ring-coupling
Configure the redundant coupling of HIPER-Rings / network segments. This
command, if called without arguments, lists the available subcommands,
their recommended order and tips how to set up a new configuration.
Format
ring-coupling
Mode
Global Config
U no ring-coupling
Clear the ring-coupling configuration (delete it).
Format
no ring-coupling
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16