Hirschmann RS20 Reference Manual

384
4.17 Port monitor
CLI L2P
Release 7.0 05/2011
4.17.1 show port-monitor
Use this command to display the global Port Monitor settings.
Format
show port-monitor
Mode
Global Config
Port Monitor
Display if Port Monitor function is enabled or disabled.
Condition crc-fragment interval (seconds)
Display the condition of the CRC fragment interval in seconds.
Condition crc-fragment count
Display the condition of the CRC fragment count.
Condition link flap interval (seconds)
Display the condition of the link flap interval in seconds.
Condition link flap count
Display the condition of the link flap count.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16