Hirschmann RS20 Reference Manual

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
6.1 Security Commands
523
6.1.33 show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed
dot1x configuration for a specified port and the dot1x statistics for a specified port -
depending on the tokens used.
Format
show dot1x [{summary {<slot/port> | all} | {detail
<slot/port>} | {statistics <slot/port>}]
Mode
Privileged EXEC and User EXEC
If none of the optional parameters are used, the global dot1x configuration
summary is displayed.
Administrative mode
Indicates whether authentication control on the switch is enabled or
disabled.
VLAN Assignment Mode
Indicates whether the VLAN Assignment Mode is enabled or
disabled.
Dynamic VLAN Creation Mode
Indicates whether the Dynamic VLAN Creation Mode is enabled or
disabled.
Safe VLAN Mode
Indicates whether the Safe VLAN Mode is enabled or disabled.
If the optional parameter 'summary {<slot/port> | all}' is used, the dot1x con-
figuration for the specified port or all ports are displayed.
Port
The interface whose configuration is displayed.
Control Mode
The configured control mode for this port. Possible values are
force-unauthorized | force-authorized | auto |
mac-based

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16