Hirschmann RS20 Reference Manual

CLI Commands: Security
524
6.1 Security Commands
CLI L2P
Release 7.0 05/2011
Operating Control Mode
The control mode under which this port is operating. Possible values
are authorized | unauthorized
Reauthentication Enabled
Indicates whether re-authentication is enabled on this port
Key Transmission Enabled
Indicates if the key is transmitted to the supplicant for the specified
port
If the optional parameter 'detail <slot/port>' is used, the detailed dot1x
configuration for the specified port are displayed.
Port
The interface whose configuration is displayed
Protocol Version
The protocol version associated with this port. The only possible
value is 1, corresponding to the first version of the dot1x specification.
PAE Capabilities
The port access entity (PAE) functionality of this port. Possible
values are Authenticator or Supplicant.
Control Mode
Display the state of the Control Mode. Possible values: auto,
forceauthorized, ....
Authenticator PAE State
Current state of the authenticator PAE state machine. Possible
values are Initialize, Disconnected, Connecting, Authenticating,
Authenticated, Aborting, Held, ForceAuthorized, and
ForceUnauthorized.
Backend Authentication State
Current state of the backend authentication state machine. Possible
values are Request, Response, Success, Fail, Timeout, Idle, and
Initialize.
Quiet Period
The timer used by the authenticator state machine on this port to
define periods of time in which it will not attempt to acquire a

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16