CLI Commands: Base
CLI L2P
Release
7.0
05/2011
4.6
Management Commands
139
4.6.52 snmp-server contact
This command adds a new SNMP server contact.
Format
snmp-server contact <con>
Mode
Global Config
con
Enter system contact up to 63 characters in length.
If the name contains spaces, enclose it in quotation marks (").
U no snmp-server contact
This command removes this SNMP server contact from the table.
<con> is the SNMP server contact to be deleted.
Format
no snmp-server contact <con>
Mode
Global Config
To Next Page
Loading...
