342
4.13
SNTP - Simple Network Time Protocol
CLI L2P
Release
7.0
05/2011
4.13.11sntp anycast vlan
Set the SNTP server's Anycast VLAN ID used for sending Anycast
messages, default: 1.
Format
sntp anycast vlan <1-4042>
Mode
Global Config
4.13.12sntp client accept-broadcast
Enable/Disable that the SNTP Client accepts SNTP broadcasts.
Format
sntp client accept-broadcast <on | off>
Mode
Global Config
U no sntp accept-broadcast
Disable the SNTP Client accepts SNTP broadcasts.
Format
no sntp client accept-broadcast
Mode
Global Config
To Next Page
Loading...
