CLI L2P
Release
7.0
05/2011
4.13
SNTP - Simple Network Time Protocol
347
4.13.19sntp client threshold
With this option you can reduce the frequency of time alterations. Enter this
threshold as a positive integer value in milliseconds. The switch obtains the
server timer as soon as the deviation to the server time is above this
threshold.
Format
sntp client threshold <milliseconds>
Mode
Global Config
Milliseconds
Enter the allowed deviation to the server time as a
positive integer value in milliseconds.
U no sntp client threshold
Disable the sntp client threshold.
Format
no sntp client threshold
Mode
Global Config
To Next Page
Loading...
