Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.17 Port monitor
389
4.17.8 port-monitor condition link-flap (Global
Config)
Use this command to configure the Link Flap settings (Link Flap counter and
interval for Link Flap detection).
Default
Disable
Format
port-monitor condition link-flap
{count <1-100>| interval <1-180>}
Mode
Global Config
count
Configure the Link Flap counter.
Default: 5. Value range: 1 - 100.
interval
Configure the measure interval in seconds for Link Flap detection.
Default: 10 seconds. Value range: 1 - 180 seconds.
4.17.9 port-monitor condition link-flap (Interface
Config)
Use this command to enable or disable Link Flap condition on a port to trigger
an action.
Default
Disable
Format
port-monitor condition link-flap {enable | disable}
Mode
Interface Config