Hirschmann RS20 Reference Manual

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
6.2 HTTP Commands
537
6.2.3 ip http server
This command enables access to the switch through the Web interface.
When access is enabled, the user can login to the switch from the Web inter-
face. When access is disabled, the user cannot login to the switch's Web
server.
Disabling the Web interface takes effect immediately. All interfaces are ef-
fected.
Default
enabled
Format
ip http server
Mode
Privileged EXEC
U no ip http server
This command disables access to the switch through the Web interface.
When access is disabled, the user cannot login to the switch's Web server.
Format
no ip http server
Mode
Privileged EXEC

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16